Configure for first use

Get started with your Reach RS2+ with the following steps:

1. Download the Emlid Flow app.

2. Turn on the Reach RS2+ by holding the power button on the front for 3 seconds.

3. Launch Emlid Flow on your device.

4. Connect to the Reach RS2+ using Bluetooth (recommended), or via a direct Wi-Fi connection. In this case, your device needs to be connected to the Reach's hotspot.
   

   SSID:	reach:xx:xx
   Password:	emlidreach

5. Select the Base output setting.

6. Select Serial as base output.
7. Select edit.
8. Configure port as RS-232.
9. Configure Baud rate as 115200
10. Save the configuration