Skip to content

Connecting to the Real-time MCU

Introduction

You can connect your Vertex One Real-time MCU to Cerebra Lab using a USB cable or wirelessly using Wi-Fi. If you want to connect to the onboard computing module, follow instructions on this page (Gen3) or page (Gen4).

Connect over USB

Cerebra Lab will automatically detect the Vertex One once it is connected to your computer with a USB-C cable. It is not required to power-on the Vertex One or even have the PowerPack installed; during this connection, it is powered via USB.

Vertex One Connection Ports

When the connection is established, the Vertex One will show up in the Cerebra Lab top bar.

Vertex Connected to Cerebra Lab

Congratulations, you are now connected to the Vertex One's Real-time MCU!