Vertex Bridge
Introduction
The Vertex Bridge is an extension module for Vertex One that offers extra connectivity for user applications. It is designed as an additional accessory that can be purchased, but we decided to also publish the design files so that you can headstart your development by using the Bridge design as a starting point for your own custom module for Vertex One.
This module allows you to connect your own sensors and actuators to your Vertex One. The module is mounted on top of the drone and is equipped with both JST and pin headers for easy access.
Specification List
Total Power
| Specification | |
|---|---|
| Total Rated Power Output | 36 W (Shared between outputs) |
External Power Connectors
| Specification | Compatible Connector |
|---|---|
| Power Output 12V/3A | Molex-MicroFit-4P 3.0 single row |
| Power Output 5V/2A | JST-GH-4P (1.25 mm) |
External Signal Connectors
| Specification | Compatible Connector |
|---|---|
| USB 3.2 (10 Gb/s) | USB-C Male |
| CAN | JST-GH-4P (1.25 mm) |
| I2C | JST-GH-4P (1.25 mm) |
| GPIO | JST-GH-4P (1.25 mm) |
| UART | JST-GH-4P (1.25 mm) |
| UART FC | JST-GH-6P (1.25 mm) |
Internal Connectors
All internal power and signal connections can be connected using the 2.54 mm pitch female pin header connectors.
Integration Guides
| Hardware Integration | Software Integration | Available Downloads |
|---|---|---|
 |
 |
 |