Powering Up

Introduction

Powering the Vertex One on and off can be done with the multifunctional power button. This section explains the functionality of this power button.

Power Button Functional Overview

Action	Function
Press and hold for 2 seconds	Turning On & Off
Press and hold for 10 seconds	Force Shutdown
Double Press	Enable Motors

Turning On

Press and hold the power button for two seconds until a you hear a beeping sound followed by the status indication LEDs turning on. The Vertex One will now automatically start both its real-time MCU (running the flight controller) and the onboard computing module.

Shutting down

The Vertex One can be shut down by pressing and holding the power button for 2 seconds and releasing. After the release the shutdown process will start, which is indicated by the status indication LEDs showing a blue-colored animation. This will shut down both its real-time MCU (running the flight controller) and the onboard computing module in a safe way to prevent data corruption.

The shutdown procedure will take from several seconds up to maximum of 15 seconds. After all status indication LEDs are turned off, the shut down sequence is finished and the PowerPack can be safely disconnected from the Vertex One.

Warning

Removing the PowerPack without performing the shut down first can result in data corruption or loss.

Force Shutdown

Only in situations where the Vertex One is not responding to any input, a force shutdown is recommended. This can be done by pressing and holding the power button for 10 seconds.

Turning On When USB-Powered

The Vertex One can be turned on powered by USB only, without the need of having the PowerPack present, for the purpose of device management (i.e. not for flying). This is done by using Cerebra Lab to connect to the real-time MCU.